Radial engineering

Radial Engineering DiNET DAN-TX2, Dante Network Transmitter, 2 Channels, Frequency range: 20 - 20, 000 Hz, 24 Bit / 96 kHz analog-digital converter, 2 XLR / 6.3 mm jack combo inputs, 1 RCA input, Processes signal levels…

Radial Engineering Re-Amp Kit- Reamping Kit, Radial Re-Amp KitIncludes the following devices: , X-Amp with power supplyTransport your guitar tracks into a new dimension with a real amplifier sound! The X-Amp is a…

Radial Engineering DiNET DAN-TX, Analogue stereo input device for Dante networks, RCA input, 3.5 mm Stereo jack input, 96kHz / 24 bit, Adjustable trim control for input level, -10 dB Cut or +10 dB Gain available for min…

Radial Engineering SGI, Studio Guitar Interface, For bridging long cable paths between guitar and amp, Consists of 2 modules (Input - Output), XLR in/ out + Jack in/ out, Incl. 15 V DC power supply

Radial Engineering EXTC-SA, Guitar Effect Router, Balanced re-amper, XLR in / out, Jack in / out, 2x jack loop in / out, Send and return separately adjustable, Wet / Dry adjustable, 180 ° Phase Invert switchable,…

Radial Engineering Pro RMP, Re-Amping Box@+The re-amping technique has always been the ""secret weapon"" of numerous recordings of the greatest names in the music business and is often used to give a new sound to guitar,…

Radial Engineering DiNET DAN-RX2, Dante Network Receiver, 2 Channels, Frequency range: 20 - 20, 000 Hz, 24 Bit / 96 kHz digital-to-analog converter, 2 Balanced XLR outputs, 3.5 mm Headphone output, 2 1/ 4"" TRS headphone…

Radial Engineering JS 2, 1 in 2 microphone splitter, Jensen transmitter for high sound quality, Connections: XLR in / thru / out, Switchable 30 dB pad, Switchable Gnd / Lift, Robust metal housing, Installation of up to 8…

Radial Engineering Studio-Q, Desktop Cue & Talkback Controller, Simple talkback controller for communication between producer and musician in the recording studio, Internal microphone, Connector for external microphone,…

Radial Engineering Sat-2, Passive Monitor Controller and Stereo Mono Converter, Suitable for studio and live applications, 2x XLR female in, 2x 6.3 mm jack in, 2x XLR male out, Switchable mute, Mono and dim (adjustable),…

Radial Engineering Catapult RX4, 4-Channel Audio Snake, Receives analogue audio or digital AES signals via Cat5/ 6 lines, 4 XLR male outputs, 4 XLR Male thru, RJ45 input and thru, For operating within an existing cable…

Radial Engineering Pro 48, Active DI Box, Jack in/ thru, XLR out, - 15 dB pad, Ground/ lift, Operates with 48V phantom power

Radial Engineering Phazer, Class A phase controller, For combining two sources such as microphone and DI signal, Switchable Gnd / lift, Polarity and bypass, XLR in out, Low pass filter, Includes power supply, Dimensions:…

Radial Engineering J 48, Active DI Box, Connectors: Jack in/ thru, XLR out, Merge function, - 15 dB pad, Low cut, Phase reverse, Ground/ Lift, Operates with 48V phantom power

Radial Engineering Gold Digger, 4-Channel Microphone Mixer, For comparing or combining up to four microphone signals on one preamp, Adjustable trim per channel, Switchable 48 V phantom power per channel, On/ off switch…

Radial Engineering Tonebone JR1-L - Latching Remote, remote footswitch, designed for controlling compatible Radial Tonebone devices, suitable for e.g. Tonebone Headbone VT, Relay Xo, Studio-Q, latching footswitch…

Radial Engineering Catapult TX4, 4-Channel Audio Snake, Transmits analogue audio or digital AES signals over Cat5/ 6 lines, 4 XLR female inputs, 4 XLR male thru, RJ45 output and thru, For operating within an existing…

Radial Engineering SB-2, Passive DI Box, Especially for bass and keyboard, Mono summation for stereo sources via in and through socket, Jack input, Jack output, XLR output, Switchable 15 dB pad, Switchable ground lift,…

Radial Engineering Catapult Mini TX, 4-Channel Audio Snake, Transmits analogue audio signals over Cat5/ 6 lines, XLR-in for operation within an existing cable infrastructure, Ethernet connection Neutrik Ethercon, Powder…

Radial Engineering Catapult Mini TRS, 4-Channel Audio Snake, Receives analogue audio signals via Cat5/ 6 lines, Jack plug for operating within an existing cable infrastructure, Ethernet connection Neutrik Ethercon,…

Radial Engineering McBoost, Microphone Preamp for Dynamic & Ribbon Microphones, XLR input and output, Adjustable gain, Gain - Full / Half: +26 dB / +20 dB, Gain variable: +4 dB to +25 dB, Class-A amplifier, Operation…

Radial Engineering Tonebone HL19-RA - Rack Ears for Tonebone Headload, rack ear adapters for 19"" rail system, suitable for e.g. Tonebone Headload V16, Headload V8 and Headload V4, rugged powder-Coated metal…

Radial Engineering IC-1 IceCube, Line Insulator, Eliminates hum and buzzes by ground loops in the frequency range 20 - 18.000 Hz, XLR input and output, Switchable GND / lift, Compact and sturdy metal housing,…

Radial Engineering Tonebone JR2 - Dual Remote, remote footswitch, designed for controlling compatible Radial Tonebone devices, suitable for e.g Tonebone Firefly, JDV, JX-42, JX62, SW8, SW4 and Bactrack, 2 heavy-duty…

Radial Engineering Workhorse The Cube, Portable 3-slot rack for system 500 modules, Per input channel input (XLR and jack), output (XLR and jack), omniport, feed and link, Switchable 48 V phantom power, External power…

Radial Engineering HotShot DM1, Microphone Mute Switch, Pedal for dynamic microphones and line signals, Suitable as splitter, Switchable GDN lift, Connections: XLR in/ out, Suitable as talkback for communication between…

Radial Engineering JPC, Professional Active / Passive DI Box, Especially for PC sound cards and AV devices, Input: RCA L / R, RCA Thru connections, 2x 6.3 mm jack 3.5 mm stereo jack input with -10 dB, XLR L / R outputs,…

Radial Engineering MIX2:1, Passive Mixer, Balanced, 2 In, 1 Out, Frequency range: 20 - 20, 000 Hz, 133 dB, Input impedance: 8 Ohm, Output impedance: 1 Ohm, 180° Polarity reverse, Ground lift, Level control, Inputs: 6.35…

Radial Engineering DiNET DAN-RX, Analogue stereo output device for Dante networks, Volume control for headphone output, 3.5 mm Jack headphone output, Sync LEDs, Ethernet via CAT5 or CAT6, SYS LEDs, Balanced XLR output…

Radial Engineering BT-Pro V2, Stereo Bluetooth Receiver, 2 Balanced XLR outputs, Integrated adjustable headphone amplifier with 3.5 mm stereo jack connection, Switchable ground lift, Switchable mono summing, Power supply…

Radial Engineering J 48 Stereo, Active 2-Channel DI Box, Jack In and Thru, XLR out, Switchable low cut, -15 dB pad and phase reverse, Ground lift, Requires 48 V phantom power

Radial Engineering EXTC-Stereo, 2-Channel Stereo Interface for Guitar Effects (Stand-Alone), Frequency range: 20 - 20000 Hz, Inputs and outputs: Jack/ XLR combo, Steel chassis, Incl. 15 V DC power supply

Radial Engineering Catapult Mini RX, 4-Channel Audio Snake, Receives analogue audio signals via Cat5/ 6 lines, XLR-out for operation within an existing cable infrastructure, Ethernet connection Neutrik Ethercon, Powder…

Radial Engineering LX-3, Passive Line Splitter with adjustable trim, XLR / jack combo input, 3 XLR outputs, Switchable ground / lift per output, Jensen transformer, Frequency range: 20 - 20, 000 Hz, Dynamic range: 140…

Radial Engineering SW-8, 8-Channel line level auto switcher, Redundant backup switch, For live applications from previously recorded backing tracks, Switches to a second backup multi-track system if an error occurs in…

Radial Engineering R15DC-EU, Power Supply, For Radial X-Amp, Re-Amp

Radial Engineering JDI, Professional Passive DI Box, Jack input, Jack thru connection, XLR output, Switchable -15dB pad, Merge function to combine 2 line signals to 1x XLR out, Switchable speaker simulation for 12 guitar…

Radial Engineering Pro AV2, Passive Stereo DI Box, 2x 6.3 mm Jack for instruments, 3.5 mm Jack and RCA connectors for -10dB consumer hardware, 2x Balanced XLR out

Radial Engineering JR1-L, AB Button with Foot Switch, AB button with large, lockable foot switch, With status LED, Input: XLR / jack combo, Output: XLR male, Robust metal housing

Radial Engineering JDI Duplex, Professional Stereo DI Box, With Jensen transformer, Connectors: Jack in, RCA in, jack / RCA thru and XLR in on each channel, -15 dB Pad and Merge on each channel, XLR in/ out, 180° Phase…

Radial Engineering X-AMP, Active re-amping box, Splitter for guitar amps, Converts a +4 dB signal into a hi-impedance signal for guitar amplifiers or effects pedals, 1x XLR in, 2x Jack out, Phase reverse, Output gain,…

Radial Engineering Powerhouse, 19"" Rack, Format: 19""/ 3 HE, With 10 slots for System 500 modules, Per input channel Input (XLR and jack). Output (XLR and jack) and Omniport (jack), Switchable link, External power…

Radial Engineering LX-2, Passive line splitter with adjustable trim, XLR / jack combi input, 2 XLR outputs, Switchable gnd / lift per output, Jensen transformer, Frequency range: 20 - 20, 000 Hz, Dynamic range:140 dB,…